The 14" Integrated Printek–Brother Max Depth Horizontal Contour Console for the Ford Police Interceptor Utility (2020+) is a vehicle-specific Contour Console built for patrol vehicles that need deeper equipment clearance with in-console printer access.
With a 14-inch console capacity, this console is engineered to hold and support communications and lighting equipment while providing a dedicated internal location for a PrintekMobile I80 or Brother PJ6 / PJ7 / PJ8 printer and paper roll. The IPB (Integrated Printer) design keeps citation printing within immediate reach, eliminating the need for external printer mounts.
The Max Depth design increases usable equipment depth for larger components, offering over 14.52 inches at the top and tapering to approximately 10.12 inches at the bottom. This layout maximizes space while maintaining proper ergonomics and access to vehicle controls.
Installation utilizes OEM mounting points for a top-down install with no drilling required, preserving factory fit and finish. The console supports multiple rear-mounted armrest configurations and side-mounted accessories for flexible upfitting.
Key Features
- 14" console capacity for compact, high-function layouts
- Integrated PrintekMobile I80 / Brother PJ6–PJ8 printer mounting
- Max Depth design for deeper equipment installations
- Vehicle-specific horizontal contour for Ford PI Utility (2020+)
- Designed to hold communications and lighting equipment
- Predrilled mounting locations for side mounts and armrests
- Uses OEM mounting points
- No drilling required
- Built for durability in daily patrol and fleet use
| Console Capacity | Vehicle Compatible |
|---|---|
| 14" | Ford PI Utility (2020+) |
Floor Plate Required:
- No
Console Type:
- Contour Console (OEM-fit, vehicle-specific)
This IPB / Max Depth contour console is engineered specifically for the Ford Police Interceptor Utility (2020+) and installs using OEM mounting points beneath the factory dash structure. Because this is a Contour Console, no floor plate is required.
With a 14-inch console capacity and expanded depth profile, the console supports deeper equipment while keeping an integrated thermal printer easily accessible from the front seating area.
Note: Installation requires removal of the OEM cover plate.
Compatible Console Accessories (Sold Separately)
The following accessories are designed to fit within and mount to the 14" console capacity, depending on configuration:
- 425-0150 / 4138 — Mamba Mount
- 425-5542 / 4143 — Console Side Mount
- 425-5542 / 5215 — Console Side Mount
- 425-1849 — Side Mounted Armrest
- 425-0029 — Tall Armrest
- 425-0040 — Rear Mounted, Side Hinged Armrest
- 425-6729 — Dual Cup Holder Face Plate Mount
Additional accessories compatible with 14-inch contour consoles may also be used based on department requirements.
Contour Console – 14" – Integrated Printek–Brother Max Depth Horizontal Contour (FORD PI UTILITY 2020+)
Description
The 14" Integrated Printek–Brother Max Depth Horizontal Contour Console for the Ford Police Interceptor Utility (2020+) is a vehicle-specific Contour Console built for patrol vehicles that need deeper equipment clearance with in-console printer access.
With a 14-inch console capacity, this console is engineered to hold and support communications and lighting equipment while providing a dedicated internal location for a PrintekMobile I80 or Brother PJ6 / PJ7 / PJ8 printer and paper roll. The IPB (Integrated Printer) design keeps citation printing within immediate reach, eliminating the need for external printer mounts.
The Max Depth design increases usable equipment depth for larger components, offering over 14.52 inches at the top and tapering to approximately 10.12 inches at the bottom. This layout maximizes space while maintaining proper ergonomics and access to vehicle controls.
Installation utilizes OEM mounting points for a top-down install with no drilling required, preserving factory fit and finish. The console supports multiple rear-mounted armrest configurations and side-mounted accessories for flexible upfitting.
Key Features
- 14" console capacity for compact, high-function layouts
- Integrated PrintekMobile I80 / Brother PJ6–PJ8 printer mounting
- Max Depth design for deeper equipment installations
- Vehicle-specific horizontal contour for Ford PI Utility (2020+)
- Designed to hold communications and lighting equipment
- Predrilled mounting locations for side mounts and armrests
- Uses OEM mounting points
- No drilling required
- Built for durability in daily patrol and fleet use
Specifications & Compatibility
| Console Capacity | Vehicle Compatible |
|---|---|
| 14" | Ford PI Utility (2020+) |
Floor Plate Required:
- No
Console Type:
- Contour Console (OEM-fit, vehicle-specific)
This IPB / Max Depth contour console is engineered specifically for the Ford Police Interceptor Utility (2020+) and installs using OEM mounting points beneath the factory dash structure. Because this is a Contour Console, no floor plate is required.
With a 14-inch console capacity and expanded depth profile, the console supports deeper equipment while keeping an integrated thermal printer easily accessible from the front seating area.
Note: Installation requires removal of the OEM cover plate.
Compatible Console Accessories (Sold Separately)
The following accessories are designed to fit within and mount to the 14" console capacity, depending on configuration:
- 425-0150 / 4138 — Mamba Mount
- 425-5542 / 4143 — Console Side Mount
- 425-5542 / 5215 — Console Side Mount
- 425-1849 — Side Mounted Armrest
- 425-0029 — Tall Armrest
- 425-0040 — Rear Mounted, Side Hinged Armrest
- 425-6729 — Dual Cup Holder Face Plate Mount
Additional accessories compatible with 14-inch contour consoles may also be used based on department requirements.
Download Additional Info
