The 16" Max Depth Integrated Printek–Brother Horizontal Contour Console for the Dodge Charger (2016+) is a vehicle-specific Contour Console designed for law enforcement vehicles that require compact equipment mounting with integrated in-console printing.
With a 16-inch console capacity, this console is engineered to hold and support communications and lighting equipment across a three-section layout—6" top, 6" middle, and 4" lower—optimizing accessibility while maintaining a clean, OEM-fit profile. The integrated design provides a dedicated mounting location for a PrintekMobile I80 or Brother PJ6 / PJ7 / PJ8 printer and paper roll, allowing officers to print citations quickly without external mounts or additional hardware.
The Max Depth design increases usable mounting depth while preserving interior ergonomics. Installation utilizes OEM mounting points for a top-down install with no drilling required, maintaining factory alignment and fit.
Built for patrol and fleet use, this console serves as the base console system for compatible mounts and accessories.
Key Features
- 16" console capacity (6" top / 6" middle / 4" lower)
- Integrated PrintekMobile I80 / Brother PJ6–PJ8 printer mounting
- Max Depth design for deeper equipment installations
- Vehicle-specific horizontal contour for Dodge Charger (2016+)
- Designed to hold communications and lighting equipment
- Uses OEM mounting points
- No drilling required
- Built for durability in daily patrol and fleet use
| Console Capacity | Vehicle Compatible |
|---|---|
| 16" (6" top / 6" middle / 4" lower) | Dodge Charger (2016+) |
Floor Plate Required:
- No
Console Type:
- Contour Console (OEM-fit, vehicle-specific)
This integrated printer contour console is engineered specifically for the Dodge Charger (2016+) and installs using factory mounting points beneath the OEM dash structure. Because this is a Contour Console, no floor plate is required.
With a 16-inch console capacity, the console supports compact equipment layouts while keeping an integrated thermal printer easily accessible from the front seating area.
Compatible Console Accessories (Sold Separately)
The following accessories are designed to fit within and mount to the 16" console capacity, depending on configuration:
- 425-0022 — Mamba Mount
- 425-5597 — Console Side Mounts
- 425-6729 — Dual ABS Cup Holder
- 425-3841 — Side Hinged Armrest
Additional accessories compatible with 16-inch contour consoles may also be used based on department requirements.
Contour Console – 16" – Max Depth Integrated Printek–Brother Horizontal Contour (DODGE CHARGER 2016+)
Description
The 16" Max Depth Integrated Printek–Brother Horizontal Contour Console for the Dodge Charger (2016+) is a vehicle-specific Contour Console designed for law enforcement vehicles that require compact equipment mounting with integrated in-console printing.
With a 16-inch console capacity, this console is engineered to hold and support communications and lighting equipment across a three-section layout—6" top, 6" middle, and 4" lower—optimizing accessibility while maintaining a clean, OEM-fit profile. The integrated design provides a dedicated mounting location for a PrintekMobile I80 or Brother PJ6 / PJ7 / PJ8 printer and paper roll, allowing officers to print citations quickly without external mounts or additional hardware.
The Max Depth design increases usable mounting depth while preserving interior ergonomics. Installation utilizes OEM mounting points for a top-down install with no drilling required, maintaining factory alignment and fit.
Built for patrol and fleet use, this console serves as the base console system for compatible mounts and accessories.
Key Features
- 16" console capacity (6" top / 6" middle / 4" lower)
- Integrated PrintekMobile I80 / Brother PJ6–PJ8 printer mounting
- Max Depth design for deeper equipment installations
- Vehicle-specific horizontal contour for Dodge Charger (2016+)
- Designed to hold communications and lighting equipment
- Uses OEM mounting points
- No drilling required
- Built for durability in daily patrol and fleet use
Specifications & Compatibility
| Console Capacity | Vehicle Compatible |
|---|---|
| 16" (6" top / 6" middle / 4" lower) | Dodge Charger (2016+) |
Floor Plate Required:
- No
Console Type:
- Contour Console (OEM-fit, vehicle-specific)
This integrated printer contour console is engineered specifically for the Dodge Charger (2016+) and installs using factory mounting points beneath the OEM dash structure. Because this is a Contour Console, no floor plate is required.
With a 16-inch console capacity, the console supports compact equipment layouts while keeping an integrated thermal printer easily accessible from the front seating area.
Compatible Console Accessories (Sold Separately)
The following accessories are designed to fit within and mount to the 16" console capacity, depending on configuration:
- 425-0022 — Mamba Mount
- 425-5597 — Console Side Mounts
- 425-6729 — Dual ABS Cup Holder
- 425-3841 — Side Hinged Armrest
Additional accessories compatible with 16-inch contour consoles may also be used based on department requirements.
Download Additional Info
