This Bio-Seat replaces the OEM rear seat in the 2020+ Ford PI Utility with a solid, easy-to-clean surface that holds up to daily transport work. The system installs using OEM bolt points and a reinforced steel frame that ties into the C-pillars and factory belt hardware. It cuts down prisoner contact, improves officer safety, and makes contraband easier to spot. Everything needed for installation—including the door-side belt system—is in the box.
Key Features
- One-piece ABS seat for fast cleanups and biohazard control
- Reinforced steel frame improves containment and durability
- Door-side belt system keeps officers from reaching across prisoners
- OEM-based install using factory bolt points and belt hardware
- Smooth surfaces make contraband easy to see and hard to hide
- Works with cargo barriers and upper grids
- Built for heavy fleet use and high-turnover transport units
| Material | Compatibility |
|---|---|
| Steel frame and brackets | Ford Police Interceptor Utility — 2020+ |
Specifications
-
System components:
- ABS Bio-Seat shell
- Seat system frame (DS/PS legs + lower supports)
- Top bar assembly
- DS/PS Hip Side Tongue Brackets
- Floor Bracket
- Cargo Barrier Brackets + Armor Brackets
- Side Wings (DS/PS)
- Belt Slot Covers, Tooth C-Retainer, RED Ring Belt Buckle
- Storage Tongues (2)
- Seat Trim Seal
- Center Bracket (cargo cover joiner)
- Threaded 5" stud + Nylock nut
- Full hardware kit (#6 screws, Tek screws, hex bolts, carriage bolts, flange nuts)
-
Tools required:
- Ratchet
- 7/16", 13mm, 15mm, 18mm sockets
- 8mm socket (OEM)
- T-15 / T-20 Torx
- 3/16" & 5/32" hex sockets
- 9/32" socket or Phillips screwdriver
- Drill + 1-1/4" hole saw (C-pillar drilling)
-
Material:
- ABS seat shell
- Steel frame and brackets
- Poly trim components
- Cleaning: Use mild soap + water only. No chemical cleaners.
Compatibility
- Designed for: Ford Police Interceptor Utility — 2020+
-
Compatible with:
- OEM seat-bolt patterns
- Factory seat-belt hardware & wiring clips
- C-pillar routing (via supplied drill template)
- Cargo barriers & secure grids
- Optional Poly Cover (SKU 475-1571)
-
Not compatible with:
- Civilian Ford Explorers
- Vehicles lacking the PIU square-tube floor structure
Seat Replacement System – Bio-Seat Replacement (Ford PI Utility 2020+)
Description
This Bio-Seat replaces the OEM rear seat in the 2020+ Ford PI Utility with a solid, easy-to-clean surface that holds up to daily transport work. The system installs using OEM bolt points and a reinforced steel frame that ties into the C-pillars and factory belt hardware. It cuts down prisoner contact, improves officer safety, and makes contraband easier to spot. Everything needed for installation—including the door-side belt system—is in the box.
Key Features
- One-piece ABS seat for fast cleanups and biohazard control
- Reinforced steel frame improves containment and durability
- Door-side belt system keeps officers from reaching across prisoners
- OEM-based install using factory bolt points and belt hardware
- Smooth surfaces make contraband easy to see and hard to hide
- Works with cargo barriers and upper grids
- Built for heavy fleet use and high-turnover transport units
Specifications & Compatibility
| Material | Compatibility |
|---|---|
| Steel frame and brackets | Ford Police Interceptor Utility — 2020+ |
Specifications
-
System components:
- ABS Bio-Seat shell
- Seat system frame (DS/PS legs + lower supports)
- Top bar assembly
- DS/PS Hip Side Tongue Brackets
- Floor Bracket
- Cargo Barrier Brackets + Armor Brackets
- Side Wings (DS/PS)
- Belt Slot Covers, Tooth C-Retainer, RED Ring Belt Buckle
- Storage Tongues (2)
- Seat Trim Seal
- Center Bracket (cargo cover joiner)
- Threaded 5" stud + Nylock nut
- Full hardware kit (#6 screws, Tek screws, hex bolts, carriage bolts, flange nuts)
-
Tools required:
- Ratchet
- 7/16", 13mm, 15mm, 18mm sockets
- 8mm socket (OEM)
- T-15 / T-20 Torx
- 3/16" & 5/32" hex sockets
- 9/32" socket or Phillips screwdriver
- Drill + 1-1/4" hole saw (C-pillar drilling)
-
Material:
- ABS seat shell
- Steel frame and brackets
- Poly trim components
- Cleaning: Use mild soap + water only. No chemical cleaners.
Compatibility
- Designed for: Ford Police Interceptor Utility — 2020+
-
Compatible with:
- OEM seat-bolt patterns
- Factory seat-belt hardware & wiring clips
- C-pillar routing (via supplied drill template)
- Cargo barriers & secure grids
- Optional Poly Cover (SKU 475-1571)
-
Not compatible with:
- Civilian Ford Explorers
- Vehicles lacking the PIU square-tube floor structure
Download Additional Info
